New Detail
Nov. 19, 2026

Redispersible Polymer Powder (RDP) is an important additive in dry-mix mortar formulations.
In skim coat and wall putty, it is mainly used to improve bonding strength and flexibility,
helping manufacturers achieve more reliable application performance.
Choosing the right RDP requires considering the formulation, substrate, and required performance rather than looking at a single product parameter.
When selecting RDP for skim coat, manufacturers generally focus on three requirements:
- Bonding strength: Improve adhesion between the skim coat and the substrate to reduce the risk of debonding.
- Flexibility: Help the hardened coating accommodate minor movement and support crack resistance.
- Application performance: Maintain suitable workability, spreading, and surface finishing during application.
The actual results depend on RDP dosage and the complete formulation, including cementitious binders, fillers, cellulose ethers, and other additives.
Start with the required balance between adhesion and flexibility.
RDP JINT™-502 is a standard high-bonding grade with a Tg of 12°C.
Its product description highlights reliable adhesion and good workability.
It is listed for wall putty, tile adhesive, and EIFS.
RDP JINT™-503 is a flexible grade with a Tg of 3°C.
It is described as providing balanced adhesion and flexibility and is also listed for wall putty.
Tg (glass transition temperature) is an important RDP selection parameter.
Lower Tg generally indicates a greater tendency toward flexibility, while higher Tg is generally associated with harder polymer films.
However, Tg alone cannot determine the final performance of skim coat.
Consider the binder system, application conditions, substrate, and required flexibility before choosing a grade.
Before confirming an RDP grade, prepare small trial batches using the same base formulation and controlled mixing conditions. Compare:
- Adhesion: Check bonding strength on the actual substrate.
- Workability: Evaluate mixing, spreading, and surface finishing.
- Crack resistance: Observe the coating after drying and curing at the intended application thickness.
- Water resistance: Test performance after water exposure when required by the application.
Compare different RDP grades and dosages systematically. Changing one factor at a time makes it easier to identify its effect on the final formulation.
For skim coat manufacturers, the right RDP should provide the required balance of adhesion,
flexibility, and application performance at a suitable formulation cost.
In RDP in construction, product specifications provide a starting point,
but practical formulation testing is essential to confirm whether a grade meets the requirements of the finished mortar.
Name: Arlo.Hu
E-Mail:arlo.hu@jtdf-rdp.com
Mobile:+86 185 6012 8196(Whatsapp)
Latest News